FF197 Fire Rated Foam

Nullifire's FF197 is approved for use within: 

• Single Door
• Door and a quarter
• Door and a half 
• Double doors

FF197 works with standard plastic and wooden packers, and no architrave is required upon installation. 

There are many benefits to using FF197 in your applications. Some of them are listed below: 

• Works with standard plastic and standard wooden packers 
• No architrave required (but can be added if required) 
• Gaps up to 35mm 
• Up to 4 hours on linear gaps
• Also gives 30 minutes on all the above doors (1,2,3&4) at a reduced frame width of 70mm
• Pink coloured foam for easy identification
• Tack free time in just 10 minutes 
• Gun and straw compatible

Tested to BS EN standards, FF197 is the only fire rated foam available on the UK market place which is fully supported by third party accredited testing.

• BS EN 1366-4 Fire resistance test for service installations. Linear joint seals.
• BS EN 1634-1 Fire resistance test for doors, shutters and openable windows.
• BS476-22 Fire resistance of non-loadbearing elements of construction. Building materials and structures.

How does EU Fire testing compare with BS fire rating testing?

Both Standards use thermocouples The European fire test standards (BS EN) all use the more advanced plate thermocouple technology to measure the air temperature, BS476 series of tests use the wire thermocouple option. BS EN (British Standard European Norm) 1366-4 could be considered a more vigorous test because it is tested to a more consistent recorded temperature.

FF197 is Tested to BS EN 1366-4, BS EN 1634-1 and meets BS476-20 & 22